| DDC CMC HV | ||||
| A.) PHYSICAL: | ||||
| Appearance : | white to creamy white free flowing powder | |||
| B.) CHEMICAL : | STANDARD | METHOD | ||
| 1.) Moisture % : | Max 8.0 | IS* 3520-1966 | ||
| (at 105 oC) | ||||
| 2.) Active Matter % : | Min 65.0 | IS 3520-1966 | ||
| (on dry basis) | ||||
| 3.) Degree of Substitution (DS) : | 0.85 - 1.00 | IS 3520-1966 | ||
| 4.) % Total Salts : | Max 35.0 | IS 3520-1966 | ||
| 5.) pH : | 8.0 - 10.0 | WTW inoLab pH Level 1 | ||
| (1% solution) | ||||
| 6.)Viscosity (600 r/min by Fann Viscosimeter) : | API | |||
| *in deionized water | Min 30.0 | API SPECIFICATION 13A/ISO 13500 | ||
| *in 4g/l salt solution | Min 30.0 | |||
| *in saturated salt water | Min 30.0 | |||
| 7.) Filtrate Volume (mL) : | Max 10.0 | API | ||
| API SPECIFICATION 13A/ISO 13500 | ||||
| 8.) Starch Content : | Absent | Iodine Test | ||
| * : Indian Standards | ** : American Petroleum Institute | |||